Start with the devices you actually need
Check the running watts shown on the device or its power adapter. Be careful with products that list a wide wattage range or that draw more when heating, cooling, or charging. Measurements from a plug-in watt meter are often more informative than guesses.
- Estimate daily energy. For each device, multiply its watts by the number of hours used per day and by quantity. For example, a 40 W fan used for 6 hours consumes about 240 Wh per day.
- Choose time without recharging. Multiply daily watt-hours by the number of days you'll rely entirely on the station's battery. If you expect solar or vehicle charging, model those separately—sunlight and charging rates are not guaranteed.
- Allow for losses and reserve. Our calculator divides estimated energy by 0.85 as a planning assumption for AC conversion, then adds a 20% reserve. Actual efficiency varies by station, load, and environmental conditions. This is a heuristic, not a test.
- Check AC output. Add the wattage of devices that may be on at the same time, then allow room for fluctuations. We show a 25% margin as a starting point. For a refrigerator, pump, or other motor, separately check startup/surge needs.
- Verify compatibility. Check the manufacturer's AC rating, outlet count and type, charging limits, usable capacity, battery operation range, transport weight, and warranty before you buy.
Example: Two 10 W LED lamps used 5 hours, a 30 W fan used 6 hours, and a 12 W phone charger used 2 hours consume (2×10×5) + (30×6) + (12×2) = 304 Wh per day. For one day without charging, PowerMatch estimates 304 ÷ 0.85 × 1.20 ≈ 430 Wh of rated battery capacity.
What changes the answer?
AC vs DC: A device powered from a USB or DC outlet may avoid some inverter losses. We use a simplifying assumption for AC loads, so treat results as approximate and verify the actual outlet you're using.
Startup and high heat: Refrigerators, pumps, heaters, air conditioners, and similar equipment can have large transient or sustained draws. Do not rely only on the continuous-watt figure, and do not connect critical devices based solely on this calculator.
Camping vs emergency backup: For a weekend trip, you may be able to recharge daily. For an outage, you may need more days without reliable charging. Our calculator defaults to no recharge during the selected period.
Solar: Solar panels cannot always deliver their rated wattage. Sun angle, clouds, shading, temperature, controllers, and charging caps affect the result. Do not count on full solar output every day.
Want an example? Try our 1,000Wh runtime calculator and guide for estimated hours at different device wattages.
Questions people ask
Are Wh and W the same?
No. Watt-hours (Wh) are stored energy; watts (W) are the rate electricity is used or supplied. Both matter.
Can a 1,000 Wh battery run a 1,000 W heater for an hour?
Not necessarily. Inverter losses and standby consumption reduce usable runtime. Check the station's continuous output rating and the appliance's load.
Why don't you include current prices?
Prices and promotions fluctuate. We prefer to get the technical comparison right and send visitors to official current product pages rather than publish prices that may quickly become inaccurate.
Calculate your setup ↗